Problem: There is damage to the camera's mechanical parts such as the mirror, shutter or aperture mechanism. Usually signs of damage include the mirror not turning, the shutter not taking pictures, the aperture not working.
Solution: Turn off the camera, remove and reinstall the camera battery, try turning your camera back on. If it still doesn't work, it's better to take it to an experienced camera service center.
9. Err 22
Problem: Image data cannot be written to the memory card. This could be caused by improper installation of the memory card, or the memory card is damaged.
Solution: Check the memory card to see whether the installation is correct and correct, or you can format the memory card with a PC or try the memory card with another camera.
10. Err 23
Problem: Memory card is full, there is no more space to store image data.
Solution: Delete some photos and videos that are less important, or you can move the data to a computer or hard disk.
11. Err 30
Problem: Shutter not working properly
Solution: Handle something like Err 20, turn off the camera, remove and reinstall the camera battery, try turning your camera back on. But if you still can't, it's better to take it to an experienced camera service center.
Source: http://doyanmotomoto.blogspot.com
12. Err 40
Problem: Damage to the battery or low battery power
Solution: Replace the battery or charge the battery fully.
13. Err 50
Problem: Damage to the electronic pulley
Solution: Turn off the camera, remove and reinstall the camera battery, try turning your camera back on. If it still doesn't work, it's better to take it to an experienced camera service center.
14. Err 60
Problem: The camera cannot use the shutter, maybe there is something blocking it
Solution: Check whether there is anything stuck in the lens, turn the camera off, and turn it on again.
15. Err 70
Problem: There is damage when the camera takes/writes data to the memory card. It is possible that there could be a problem with the memory card or it could be worse on the camera mainboard.
Solution: Check the memory slot on the camera, make sure there is no damage. Next, format the memory card with the help of a PC, or use another similar memory card.
Source : www.plazakamera.com
16. Err 80
Problem: Appears if the camera shutter is not ready to shoot when it detects that the shutter sequence process has not been completely completed, such as in slow speed / bulb mode.
Solution: Try turning the camera off and on again or removing and reinserting the battery.